[. . . ] PowerBook (FireWire) AirPort Card Replacement Instructions Be sure to follow the instructions in this sheet carefully. [. . . ] Important: To avoid electrostatic discharge, always ground yourself by touching a metal surface before you touch any parts or install any components inside the computer. To avoid static electricity building back up in your body, do not walk around the room until you have completed your installation and closed the computer. 4 - PowerBook (FireWire) AirPort Card 9 With a Phillips screwdriver, remove the screws that secure the internal heat shield. Screws Heat Shield . 10 Lift up the internal heat shield. 11 Position the AirPort Card with the AirPort ID numbers and bar code facing up and connect the AirPort Card to the end of the antenna cable. Make sure that the connector on the end of the antenna cable is straight before inserting it into the card. AirPort Card Connector AirPort Card AirPort Antenna Cable PowerBook (FireWire) AirPort Card - 5 12 Slide the card into the connector located just above the PC Card slot. Make sure to slide the card all the way in until you feel that the card is securely attached to the connector. Note: When inserting the AirPort Card, you may need to tuck the edge of the card under the opening in the plastic case (where the top of the keyboard attaches). This helps align the card with the connector and prevents the back end of the card from sticking up after it has been inserted. AirPort Card AirPort Card Connector AirPort Card 13 Insert the internal heat shield and replace the screws. When replacing the internal heat shield, make sure it does not cover the plastic tabs for the hard disk and AirPort Card. [. . . ] AirPort is a trademark of Apple Computer, Inc. 8 - PowerBook (FireWire) AirPort Card [. . . ]